Finished the print of the Mjolnir hammer for my son. All the ‘metal’ bits were printed with MakerJuice G+. The handle is made from a wooden dowel and wrapped with leather. Quite happy with the overall result. The main block was printed twice (each about 4.5 hours) as I had a lot of light bleed causing the end facing the build platform to be quite blobby. I filled both sides with putty and cut the better ends off and joined it up to create the complete block. I had to patch the seam and sanded it down. The ring for the handle and the circular piece on top took about an hour and the end cap for the handle took 2 hours.